Name: Three-jaw pump coupling

Description: pump with three jaw coupling is the use of a number of non-metallic materials of the dowel pin, placed in two and a half coupling between inner surface and outer ring the involution of the hole, achieved by column pin transfer torque half coupling of a device.

Label: GL roller chain coupling safety coupling GLF roller chain coupling

Product details:

Pump with three jaw coupling is the use of a number of non-metallic materials of the dowel pin, placed in two and a half coupling between inner surface and outer ring the involution of the hole, achieved by column pin transfer torque half coupling of a device.

Pump tripper coupling product features

1. Small volume, light quality, simple structure, convenient installation and low price, often used for small power occasions;

2. The inertia force is small, which is suitable for the torque of small torque, high speed, no sharp impact of the two shafts, nylon sliding block transfer torque is smaller, but more suitable for high-speed operation, without lubrication;

3. The transmission torque is large, and in the same torque, most of the rotary diameters are smaller than the tooth couplings, which can replace the tooth coupling.

4. Allowable radial displacement (0.01 d + 0.25) mm and d axis diameter (mm); Allowable angular displacement of 0 degrees 40; The additional radial force of the coupling is (0.1 ~ 0.3) P;

5. The standard code for the pump industry is Bl104, and its maximum allowable torque is 850N · m, with the maximum diameter of 50mm.

Pump tripper coupling product parameters

1. Allowable radial displacement (0.01 d + 0.25) mm and d axis diameter (mm); Allowable angular displacement of 0 degrees 40; The additional radial force of the coupling is (0.1 ~ 0.3) P;

2. The standard code for the pump industry is Bl104, and the maximum allowable torque is 850N · m, with the maximum diameter of 50mm;

3. The middle slip of the claw coupling is made of a clamping rubber or nylon.